You Need To Know About Joyetech Cuboid 200 Mod

New version of the Cuboid 200 is a 200 W electronic box powered by three 18650 batteries. Its grip is pleasant and the Fire switch, that sometimes got stuck, falls just under your index.

Rather compact for a triple battery box, the Cuboid 200 V2 is only 99.9 mm high, 63 mm wide and 22 mm in diameter. Logically, the atomizers larger than 22 mm, whose popularity is increasing, will outreach the edge of the box. It is regrettable that Joyetech didn't make the 510 side a bit larger, like the Chinese manufacturer did with eVic Primo.

The weight is consequent, 243 g naked but 378 g with the batteries and above 400 g when operated (with the atomizer and the batteries). At this stage, it becomes to be heavy. Fortunately, the three 18650 batteries (not included) ca, easily be inserted from the bottom with a sliding cap.

The OLED screen, 0.96 inches, is located on the upper side of the box, next to the 510 pin. It is not an ideal location but it is readable and displays all necessary information. It alsso shows the charge level in each of the three batteries since they are managed separately by the chipset.

As usual, Joyetech's chipset works wonders. It imbeds the 6.04 firmware upgradeable via USB. It proposes all the classical vaping modes, VW, TC (Ni, Ti and SS316), TCR and the preheat function that boosts power in the first few seconds after lighting. This function allows tuning the feeling as close as possible to what you like, as a function of the type of clearomizer.